Product Introduction
The living folding container house is made of galvanized steel and sandwich panels. The house adopts a folding design, and the walls and the base are connected by high-strength galvanized hinges, which allows the house to be easily folded and unfolded. When in use, the house can be quickly installed through crane hoisting and manual operation, from a folded state to a fully unfolded state.
Product Advantages
Sturdy And Durable
The living folding container house is built with high-strength steel and high-quality fireproof boards. The yield strength of the steel exceeds 345MPa, which can withstand external impact and heavy pressure. The wear resistance coefficient of the fireproof board is about 30% higher than that of ordinary boards, and the overall service life of the house exceeds 20 years.
Waterproof
The connection parts of the living folding container house are double-protected by special rubber sealing strips and waterproof glue. The compression deformation rate of the sealing strip is less than 10%, and the fit is tight; the thickness of the waterproof glue coating is 2-3mm, and the waterproof can reach IPX7 level. Even if there is heavy rain or 1 meter of water accumulation, the house can remain dry.
Heat Insulation
The walls and roofs of the living folding container house are filled with insulation materials, and the thermal conductivity is less than 0.03W/(m・K), which can make the indoor temperature in summer 5-8℃ lower than the outdoor temperature and reduce heat loss in winter.
How To Install
Site Cleaning And Leveling
Clean up the debris at the installation site and level the ground so that it can stably bear the weight of the container.
Foundation Construction
Design according to the container specifications and build a foundation such as concrete or ground beams to prevent displacement or settlement of the container after placement.
Lifting And Positioning
Use professional cranes to accurately lift the container above the foundation, slowly place it and accurately align it to ensure that the container fits tightly with the foundation.
Connection And Tightening
When multiple boxes are combined, use adapters to firmly connect the box, and then use anchor bolts to fix the container to the foundation.
Internal Assembly
Lay the floor, install the wall and ceiling in the container, and layout water and electricity lines, lighting and sockets and other facilities.
External Connection
Connect the external water supply and drainage and power supply lines, and install sewage treatment devices and air conditioner outdoor units as needed.
Sealing And Waterproofing
Use waterproof strips and sealants to treat doors, windows and joints to block wind, rain and dust.
Image Showcase
Hot Tags: living folding container house, China living folding container house manufacturers, suppliers, factory, transportable collapsible container for dormitory, modular folding house, military container house, spa container house, transportable collapsible container for wall, mobile container bathing area