Quick-fit Container House

【Product Introduction】

The quick-fit container house uses high-quality steel as the main frame, and the walls are mostly made of 75mm glass wool. Based on modular design, it can be flexibly applied to various scenarios such as temporary dormitories at construction sites, field operation camps, and emergency rescue settlements.

Product Specifications

【Product Advantages】

Sealing And Waterproofing
The quick-fit container house has sealing strips at the joints between doors, windows and walls (waterproof permeability coefficient is less than 1.0×10⁻¹³cm³/cm・s・Pa), which keeps the interior of the house dry even in heavy rains of up to 200 mm/hour.

Sturdy And Durable
The quick-fit container house is built with high-quality steel, with a yield strength of 345MPa and a service life of 20 years.

Thermal Insulation
The quick-fit container house uses 75mm glass wool walls with a thermal conductivity of 0.033W/(m・K). The thermal insulation is 45% better than traditional materials, reducing the room temperature by 8℃ in summer and raising it by 6℃ in winter.

【How To Install】

Preparation And Transportation
Use a crane to hang the hook into the lifting hole at the bottom corner of the folding container house, lift the entire container house for transportation and move it to the installation site.

Main Frame Lifting And Unfolding
After arriving at the installation site, use a crane to lift the main frame of the folding container house and unfold it smoothly.

Install The Support Structure
Place the support rod in the middle of the box.

Wall Installation
First, push open one wall and tighten it in place with the fastening screws. During the installation process, you need to use tools such as screwdrivers and hammers, and ensure that the screws are properly tightened to avoid damaging the surface of the box. Then, install the other wall with doors and windows, which also needs to be pushed open and tightened.

Unfolding Of Front And Rear Wall Panels And Long Wall Panels
By rotating the installation assembly, the front and rear wall panels are rotated around the limit rod as the center until the wall panels are vertically unfolded, and the gap is sealed by the close fit of the special-shaped steel components. Then, manually open the long wall panel, open it with the folding assembly, and the gap is sealed by the close fit of the special-shaped steel components.

Fixing And Adjustment
Fix the front and rear wall panels and the long wall panels in place using fixing components such as bolts, etc. After completing all installation steps, conduct a comprehensive inspection and adjustment.

Hot Tags: quick-fit container house, China quick-fit container house manufacturers, suppliers, factory, spacious container house, modern container house, easy assemble container house, sustainable container house, single story container house, exhibition container house